Uzmac> Water pumps MWP-OV series

Water pumps MWP-OV series

The MWP-OVW and the MWP-OVA ranges of vacuum assisted engine driven pumps are purposely built with a 50 m³/h high performance dry vacuum style pump that guarantees rapid self-priming (8,5 m) with minimal operating expense. The OVW series is characterized by an water cooled engine, while the OVA series is air cooled.  Both lines come in an open set version (optional canopy). Continual performance can be attributed to the diaphragm vacuum pump’s automatic priming even when loaded with significant air intake. The vacuum-assisted pumps can be used in different range of applications:

  • passive drainage

  • active drainage

  • active drainage by well point system

  • hydraulic by-pass

  • hydraulic big-flow by-pass

​

Pumps are available with different inlet/outlet size (from 4" to 8"). See the table below for detailed specifications.

KEY FEATURES

  • 50 m³/h dry vacuum system

  • 8,5 m self-priming

  • High capacity tank for a long running time without refuelling

  • High performance pump end

  • Male/female connectors for an external fuel tank

  • Control panel with engine alarms, RPM throttle and emergency stop button

  • Engine speed from 1500 to 1800 RPM

  • Robust skid base complete with forklift pockets and central lifting eye

  • Water cooled Perkins engine or Air cooled Deutz engine

  • Low maintenance requiring

STANDARD CONTROL PANEL

  • Starting key

  • Hour counter

  • Fuel level monitor

  • Vacuum meter

  • Battery charge signal lamp

  • Oil level signal lamp

  • Water temperature signal lamp

  • Pre-heating signal lamp

OPTIONALS

  • Customer color (RAL) (single or double)

  • Inlet/Outlet polyethylene tubes with coupling and strainer

  • Off-road trailer

  • Pre-heating element

  • Electric motor

  • Second dry vacuum pump to increase the maximum flow up to 100 m³/h

  • Treatment for salt water

  • Top roof canopy

OPTIONAL AUTO-START/STOP PUMP CONTROLLER

As option you can gent an electronic controller specifically designed for pumps. Its automaic features eliminate the need for personnel to besent to the worksite, because the functionality of the pump can be programmed or controlled remotely.

  • Manual/Automatic regulation of engine speed

  • Control of hydraulic circuit pressure and engine speed

  • Automatic or remote start/stop of the pump

  • Engine protection

  • Historical failure list

  • No.2 floats for managing the automatic start/stop

 

TECHNICAL CHARACTERISTICS

  Inlet-Outlet size Max. capacity Max. head Solid handling Impeller diam. Max. flow Engine(OVW)/(OVA) Min./Max. speed Dimension (WxLxH) Fuel tank capacity

Running time (min.rpm@75%) 

OVW/OVA

 Dry weight
MWP4OV-W/A 4''

2.950

l/min

 32 m 34 mm 245 mm 175 m³/h Perkins 403D-15G/ Deutz F2L-2011

1.500/1.800

rpm

 980×2.010×1.220 175 l 62,5 h/67,3 h 800kg
MWP6OV-W/A 6''

5.500

l/min

 32 m 75 mm 245 mm 330 m³/h Perkins 404D-22/Deutz F3L-2011

1.500/1.800

rpm

 980×2.010×1.220 175 l 43,7 h/46, 0 h 890 kg
MWP8OV-W/A 8''

10.900

l/min

 32 m 80 mm 278 mm 650 m³/h Perkins 1104D.44T/Deutz F6L-912

1.500/1.800

rpm

 1.305×2.203×1.640 290 l 25,9 h/ 42,6 h 1.395 kg