Water pumps MWP-SP series
The MWP-SP range includes self-priming pumps built for pumping water with solids holdup, containing sand and mud. This series is characterized by air cooled engines and an open set design. The open impeller has wide passages to guarantee solids control. The standard version is in cast iron type spheroidal with high wear resistance. The standard models are built on skid base, on request an off-road trailer is available. These pumps can be used in different range of applications:
-
passive drainage
-
active drainage
-
active drainage by well point system
-
hydraulic by-pass
-
hydraulic big-flow by-pass
Pumps are available with different inlet/outlet size (from 4" to 12"). See the table below for detailed specifications.
KEY FEATURES
-
8,5 m self-priming
-
High performance pump end
-
Long running fuel tank
-
Open blades impeller and wear plate in spheroidal cast iron
-
Mechanical seal: Widia on widia without maintenance
-
Body pump in cast iron type EN JGL 250
-
Control panel with engine alarms, RPM throttle and emergency stop button
-
Heavy duty skid base complete with forklift pockets and central lifting eye
-
Air cooled Deutz engine
The MWP-SP range includes self-priming pumps built for pumping water with solids holdup, containing sand and mud. This series is characterized by air cooled engines and an open set design. The open impeller has wide passages to guarantee solids control. The standard version is in cast iron type spheroidal with high wear resistance. The standard models are built on skid base, on request an off-road trailer is available. These pumps can be used in different range of applications:
-
passive drainage
-
active drainage
-
active drainage by well point system
-
hydraulic by-pass
-
hydraulic big-flow by-pass
STANDARD CONTROL PANEL
-
Starting key
-
Hour counter
-
Fuel level monitor
-
Vacuum meter
-
Battery charge signal lamp
-
Oil level signal lamp
-
Water temperature signal lamp
-
Pre-heating signal lamp
OPTIONALS
-
Customer color (RAL) (single or double)
-
Inlet/Outlet polyethylene tubes with coupling and strainer
-
Off-road trailer
-
Pre-heating element
-
Electric motor
-
Treatment for salt water
TECHNICAL CHARACTERISTICS
| Inlet-Outlet size | Max. capacity | Max. head | Solid handling | Impeller diam. | Max. flow | Engine | Min./Max. speed | Dimension (WxLxH) | Fuel tank capacity |
Running time (min.rpm@75%)
|
Dry weight | |
| MWP4SP | 4'' |
2.500 l/min |
31 m | 40 mm | 198 mm | 150 m³/h | Deutz F2L-2011 |
1.450/2.200 rpm |
950×1.750×1.200 | 128 l | 49,2 h | 680kg |
| MWP6SP | 6'' |
5.450 l/min |
38 m | 77 mm | 356 mm | 325 m³/h | Deutz F3L-2011 |
1.450/2.200 rpm |
950×1.750×1.200 | 128 l | 33, 7 h | 770 kg |
| MWP8SP | 8'' |
9.200 l/min |
40 m | 50 mm | 344 mm | 550 m³/h | Deutz F4L-912 |
1.450/2.200 rpm |
1.200×2.100×1.450 | 170 l | 25,0 h | 1.150 kg |
| MWP10SP | 10'' |
12.700 l/min |
30 m |
85 mm | 375 mm | 762 m³/h | Deutz F6L-912 |
1.450/1.800 rpm |
1.400×3.200×1.600 | 300 l | 29,7 h | 1.800 kg |
| MWP12SP | 12'' |
25.000 l/min |
23 m |
90 mm | 398 mm |
1.500 m³/h |
Deutz BF6M-1013FC |
960/1.100 rpm |
1.500×3.500×1.600 | 300 l | 12 h | 2.100 kg |