Uzmac> Water pumps MWP-V series

Water pumps MWP-V series

The MWP-V range of vacuum assisted engine driven pumps are purposely built with a 50 m³/h high performance dry vacuum style pump that guarantees rapid self-priming (8,5 m) with minimal operating expense. This series is characterized by an heavy duty silence-proof canopy and a water cooled engine. Continual performance can be attributed to the diaphragm vacuum pump’s automatic priming even when loaded with significant air intake. The vacuum-assisted pumps can be used in different range of applications:

  • passive drainage

  • active drainage

  • active drainage by well point system

  • hydraulic by-pass

  • hydraulic big-flow by-pass

​

Pumps are available with different inlet/outlet size (from 4" to 8"). See the table below for detailed specifications.

KEY FEATURES

  • 50 m³/h dry vacuum system

  • 8,5 m self-priming

  • Bunded base with drain plug with 110% liquid containment capacity

  • High capacity tank for a long running time without refuelling

  • High performance pump end

  • Male/female connectors for an external fuel tank

  • Control panel with engine alarms, RPM throttle and emergency stop button

  • Engine speed from 1500 to 1800 RPM

  • Easy access maintenance doors

  • Silenced model with a sound level from 65 to 68 dBA at 7 meters

  • Heavy duty frame and robust skid base complete with forklift pockets and central lifting eye

  • Water cooled Perkins engine

  • Low maintenance requiring

STANDARD CONTROL PANEL

  • Starting key

  • Hour counter

  • Fuel level monitor

  • Vacuum meter

  • Battery charge signal lamp

  • Oil level signal lamp

  • Water temperature signal lamp

  • Pre-heating signal lamp

 

OPTIONALS

  • Customer color (RAL) (single or double)

  • Inlet/Outlet polyethylene tubes with coupling and strainer

  • Off-road trailer

  • Pre-heating element

  • Electric motor

  • Second vacuum pump to increase the maximum flow up to 100 m³/h

  • Treatment for salt water

​

​

OPTIONAL AUTO-START/STOP PUMP CONTROLLER

As option you can gent an electronic controller specifically designed for pumps. Its automaic features eliminate the need for personnel to besent to the worksite, because the functionality of the pump can be programmed or controlled remotely.

  • Manual/Automatic regulation of engine speed

  • Control of hydraulic circuit pressure and engine speed

  • Automatic or remote start/stop of the pump

  • Engine protection

  • Historical failure list

  • No.2 floats for managing the automatic start/stop

TECHNICAL CHARACTERISTICS

  Inlet-Outlet size Max. capacity Max. head Solid handling Impeller diam. Max. flow Engine Min./Max. speed Dimension (WxLxH) Fuel tank capacity Running time (min.rpm@75%) Dry weight
MWP4V 4''

2.950

l/min

 32 m 34 mm 245 mm 175 m³/h Perkins 403C-15

1.500/1.800

rpm

 1.000×2.150×1.350 175 l 62,5 h 1.036 kg
MWP6V 6''

5.500

l/min

 32 m 75 mm 245 mm 330 m³/h Perkins 404D-22

1.500/1.800

rpm

 1.000×2.150×1.350 175 l 43,7 h 1.125 kg
MWP8V 8''

10.900

l/min

 32 m 80 mm 287 mm 650 m³/h Perkins 1104D.44T

1.500/1.800

rpm

 1.330×2.250×1.770 290 l 25,9 h 1.645 kg